News

The laptop is the biggest advantage of mobility, and provide the basis of all this is the battery.In energy saving technology and battery technology to temporarily a breakthrough, fully optimized battery and master the use of some relevant skills will be useful.Laptop batteries use time long, however, are often discontent, even shows the battery is damaged, so we must pay special attention to in the use of some small operation skills.


1, Choose the best repairing time


Laptop batteries appeared aging is unavoidable, almost all of the repair methods are trial "deep deep filling put" principle, in order to alleviate the battery memory effect.But there is no denying the fact that the depth of charging and discharging operation for laptop battery itself is not good, is a kind of not to approach.If battery life just reduced the dozens of minutes, you should carefully take this operation method.In addition, the manufacturer already has carried on the optimization to battery, there is no depth charge and discharge can improve battery capacity again on its own.But exactly when needed depth charge and discharge is difficult, after all, every time when using the consumed power is different, so everyone with BatteryMon the professional software tools (tip: it is recommended that you download via the Internet, here can't download address).


BatteryMon is a laptop batteries specifically for monitoring software, especially for those who have no built-in power management chip and software of the machine, it certainly helped a lot of a lot.The biggest feature of BatteryMon can display discharge curve, and after installation will automatically run.A good performance of the battery discharge curve, will have a very rules overclocking every drop one time about is basically the same.And if found to have very abnormal, so it is necessary to repair battery "deep charge deep discharge".


2, the basic method of "deep charging and deep discharging"


Battery calibration is an effective method to tackle aging cells, in general, the various brand notebook will have a dedicated cell calibration software.Such as the IBM ThinkPad series has a dedicated discharge software, recommended that all users of IBM notebook use.But the program need to repeat 3 times to get the best effect, download after discharge software and implement, system will prompt production installation disk.Use the installation disk boot PCDOS, unplug the AC power supply, discharge the software will automatically control the discharge.When everything is over after the laptop will be automatically shut down, and then we can plug in the AC power supply, time control in 9 ~ 12 hours, again and again for 2 ~ 3 times.


For the activation of laptop batteries, we have to find the right key discharge software.If your laptop unfortunately there is no special discharge software, you can press to disable power management features in the BIOS and Windows, and then in the case of not to run any program will be exhausted battery, and then on the charging press to around 80%, after repeated several times also tantamount to manually put "" deep deep filling.In fact, the purpose of this approach is to keep the battery, small current discharge and the discharge in our daily use is impossible to achieve, its effect and discharge for the software.


Laptop battery repair tools and tips


The laptop is the biggest advantage of mobility, and provide the basis of all this is the battery.In energy saving technology and battery technology to temporarily a breakthrough, fully optimized battery and master the use of some relevant skills will be useful.Laptop batteries use time long, however, are often discontent, even shows the battery is damaged, so we must pay special attention to in the use of some small operation skills.